Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
|
1) Dimensional Standards :
All dimensions are in mm otherwise specified & as per ANSI B1 6.9.
2) Material of Construction :
A)
Tee & Cross are supplied either in FEP OR PFA lined depending on process liquid handled & as per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B)
ASTM-A-234, Grade WPB in compliance with ANSI-B-16.28.
C)
Tee & Cross are being supplied with fixed flanges. However it can be supplied with loose flanges as per individual customer's requirement & confirm to ASTM A-105 or IS- 2062.
D)
GTPL offers SS fittings as per individual customer's requirement .
GTPL Offers Flexible PTFE plain OR corrugated hose with high tensile SS wire braiding. PTFE Lined SS Collar is crimped with flexible PTFE Hose. Thus providing entire contact area with PTFE throughout the hose Assembly.
1) Dimensional Standards :
A)
Flanges can be supplied with standards like ASA, BS, DIN OR JIS as per individual customer’s requirement.
B)
Lengths & Nominal bore will be supplied as per individual customer’s requirement.
Material of Construction :
A)
PTFE White Liner confirms to standard resin Specification ASTM D-1457 ASTM D 4994 & 95 TYPE II.
B)
Flanges confirms to ASTM A 105 Gr, B OR IS 2062. However GTPL
Recommends SS Stub ends with both flanges as loose..
1) Dimensional Standards :
A)
All dimensions are in mm otherwise specified & AS Per ANSI B1 6.9.
Material of Construction :
A)
Tee & Sight Glass are supplied either in FEP OR PFA lined depending on process liquid handled & as per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B)
Tee & Sight Glass are being supplied with fixed flanges. However it can be supplied with loose flanges as per individual customer's requirement & confirm to ASTM A-105 or
IS 2062.
1)
PTFE Gaskets can be offered either Mill Type or Slit type on request.
2)
Main Body Gaskets of Glass Lined Reactors of all sizes also offered on request.
3)
PTFE Ring Gaskets of any sizes also offered on request.
4)
Gasket of sizes 300 x 400 & 350 x 450 offered are for elliptical Manhole Nozzles.
1) Dimensional Standards :
A)
All dimensions are in mm otherwise specified & AS Per ANSI B1 6.9. Flanges are drilled as per DIN, ASA, JIS or BS Standards as per individual customer's requirement.
2 ) Material of Construction :
A)
Reducers & Reducing flanges are from PTFE & as per Standard resin spec. ASTM D 1457 TYPE II & ASTM D-4894 & 5 type-II
B)
Fabricated from Seamless Carbon Steel Pipe as per ASTM-A-106 Gr, B & Flanges confirms to ASTM A-105 OR IS 2062 OR Ductile Cast Iron confirms to ASTM A-395 or SG Iron confirms to ASTM A-536 (60-40-18).
C)
Reducers are being supplied with fixed flanges. However it can be Supplied with loose Flanges as per individual customer's requirement.
D)
GTPL offers SS fittings as per individual customer's requirement .
|
|
|
|
|
|
1) Dimensional Standards :
A) All dimensions are in mm otherwise specified.
B) PTFE sleeve to be provided on request for full vacuum application.
C) Flanges are drilled with standard like ASA, DIN, BS or JIS depending on individual customer's requirement.
2) Material of Construction :
A) Flanges confirms to ASTM A-105 OR IS-2062 or SS 304 or SS 316
B) PTFE is as per Standard resin spec.
ASTM D 1457 Type II & ASTM D-4894 & 5 type - II
1) Dimensional Standards :
All dimensions are in mm otherwise specified & as per ANSI B16.9.
2) Material of Construction :
A) Strainers are supplied either in FEP OR PFA lined depending on process liquid handled & as
per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Seamless Carbon steel pipes confirm ASTM-A-106 GRD. B Sch.40/20.
C) Strainers are being supplied with fixed flanges & confirms to ASTM A-105 or IS-2062.
D) GTPL offers SS fittings as per individual customer's requirement.
1) Dimensional Standards :
All dimensions are in mm otherwise specified & as per ANSI B16.9.
2) Material of Construction :
A) Strainers are supplied either in FEP OR PFA lined depending on process liquid handled & as
per standard resin specification. ASTM D 2116 & ASTM D 3307 Type II respectively.
B) Seamless Carbon steel pipes confirm ASTM-A-106 GRD. B Sch.40
C) Strainers are being supplied with fixed flanges & confirms to ASTM A-105 or IS-2062.
D) GTPL offers SS fittings as per individual customer's requirement.
A) GTPL offers MS FEP/PFA Lined Manhole cover suitable for 150mm NB, 200mm NB, 300 x 400, 350 x 450mm (both Elliptical) 500&600mm NB round cover of Glass Lined reactor with Sight Glass assembly of Size : 4", 6" 8" OR 10" as per individual customer's requirement
C) GTPL offers MS FEP/PFA Lined Protection ring of sizes 150mm NB, 200mm NB, 300 x 400mm, 350 x 450mm (Both elliptical) & 500&600mm NB protection ring.
B) Manhole covers also can be offered with Charging nozzle & Sight Glass for all sizes specified above.
D) GTPL also offers cover of higher sizes as per individual customer's Requirement.
A) GTPL offers either PTFE, PFA OR FEP Lined Anchor or Propeller Stirrer with Hastalloy "C" Sleeve for gland packing area as per individual customer's requirement.
B) GTPL offers MS PTFE Lined Thermometer Pocket along with Tantalum Tipfor Sensing the Temperature as per individual customer's requirement.
1) Dimensional Standards :
A) Flanges F-1 & F-2 can be supplied with standards like ASA, BS, DIN OR JIS as per individual customer's requirement.
B) Lengths L-1, L-2, L-3 & nominal bore will be supplied as per individual customer's requirement.
2) Material of Construction :
A) PTFE white liner confirms to standard resin specification ASTM D-1457 ASTM D 4994 & 95 Type II.
B) Seamless Carbon Steel Pipe as per ASTM-A-106 Gr, B Sch 40.
C) Flanges confirms to ASTM A 105 Gr, B OR IS 2062.
PTFE LINED DIP
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.